manualshive.com logo in svg

Wen TC0714, Инструкция по эксплуатации, Страница: 16 / 20

Поделиться
Скачать
Wen TC0714 Скачать руководство пользователя страница 16

TROUBLESHOOTING GUIDE

WARNING!

 Stop using the generator immediately if any of the following problems occur or risk serious 

personal injury. If you have any questions, please contact customer service at 

1-800-232-1195

 (M-F 8-5 CST), 

or email 

[email protected]

.

Problem

Possible Cause

Solution

Motor Does Not Start

The outlet that the tiller is connected to is 

faulty or has tripped.

Ensure that the unit is plugged into a working 

outlet and the tool is switched on.

The power cord or extension cord is 

damaged or not properly plugged in.

Check the power cord, extension cord, power 

plug and the power outlet. Do not use if any 

cord is damaged.

Motor is overloaded and circuit breaker 

trips.

Wait 15 minutes and try to use the tiller again. 

Avoid using the tiller in soil with lots of hard 

objects or when the soil is wet or frozen.

Carbon brushes worn down.

Contact customer service at 

1-800-232-1195

Abnormal Noise

Tines are worn or damaged.

Replace the tines.

Working depth is too shallow.

Work slower and deeper with the tiller.

Excessive Vibrations

Loose components.

Tighten all bolts. If noises continue contact cus-

tomer service at 

1-800-232-1195

Unsatisfactory Performance

Tines are worn or damaged.

Replace the tines.

Working depth is too shallow.

Work slower and deeper with the tiller.

Tool Overheating

Motor is overloaded and circuit breaker 

trips.

Reduce load on motor - work slower and shal-

lower. Avoid using the tiller in soil with lots of 

hard objects or when the soil is wet or frozen.

Extension cord too long with an insuf-

ficeint gauge.

Utilize an extension cord of appropriate gauge 

and length.

16

Содержание TC0714





















Отзывы:

Нет отзывов