Wen SB24E, Инструкция по эксплуатации, Страница: 8 / 44

8 9
5. If using the electric start function, ensure the ex-
tension cord is of the proper gauge. Refer to the exten-
sion cord chart on p. 9 for the recommended gauge and
length of extension cord.
6. Disengage all control levers before starting the en-
gine.
7. Do not make any adjustments to the machine while
the engine is running.
8. Let the machine warm up for 1 – 2 minutes before
starting to clear snow.
SNOW BLOWER OPERATION
1. Only use the snow blower for its intended purpos-
es. Modifying or using the snow blower for operations
for which it was not designed may cause hazards and
personal injury.
2. Do not touch hot parts. This snow blower produces
heat when running. Temperatures near exhaust can ex-
ceed 150ºF (65ºC). Allow snow blower to cool down
after use before touching engine or areas of the snow
blower that become hot during use.
3. Snow blowers vibrate in normal use. During and af-
ter the use of the snow blower, inspect the snow blower
for damage resulting from vibration.
4. Always turn snow blower off before refueling. Allow
snow blower to cool for at least 2 minutes before re-
moving fuel cap. Loosen cap slowly to relieve pressure
in tank.
5. Remove the engine key from the engine when the
engine is not running. Store it in a safe place out of the
reach of children.
6. Empty fuel tank before storing or transporting the
snow blower. Do not store snow blower or gasoline
near furnaces, water heaters, or any other appliances
that produce heat or have automatic ignitions. Store the
snow blower and fuel away from sparks, open flames,
pilot lights, heat and other sources of ignition.
7. Do not operate the machine under the influence of
alcohol, drugs, or other substances that could cause
lack of awareness .
8. Always wash hands after handling machine.
9. Never direct discharge at anyone, even if you think
it will be really funny.
10. Never put hands, feet, or other beloved body parts
near rotating parts, inside the auger housing, or into
the chute assembly, even if the engine is not running.
Use the included clean-out tool to clear out clogs.
11. Do not modify or bypass any safety devices. Keep
them in good working order.
12. Exercise extra caution when operating on, or
crossing, gravel or crushed-rock surfaces. Adjust the
skid plates and scraper bar appropriately when gravel or
crushed-rock surfaces are involved.
13. Do not operate on steep slopes (exceeding 15º in-
clination).
14. Do not overload the machine. Let it work at the
pace for which it was designed.
15. Disengage the auger lever when transporting the
product, or not clearing snow.
16. Operate only in good-visibility conditions. Keep
sure footing and a firm grip on the handles. Walk –
never run.
SNOW BLOWER SAFETY WARNINGS
WARNING! Do not operate the power tool until you have read and understood the following instructions
and the warning labels.
8
CAUTION: Misuse of this snow blower can damage
it or shorten its lifespan.
NOTE: This manual cannot possibly cover all situa-
tions that could occur. Always use common sense
and good judgment when operating the machine.