Wen MM1215 Скачать руководство пользователя

Страница: 9 / 36

UNPACKING

With the help of a friend or trustworthy foe, carefully remove the miter saw from the packaging. Make sure to take

out all contents and accessories. Do not discard the packaging until everything is removed. Check the packing list

below to make sure you have all of the parts and accessories. If any part is missing or broken, please contact our

customer service at

1-847-429-9263

(M-F 8-5 CST), or email

[email protected]

PACKING LIST

TRANSPORTING

Before transporting your miter saw, make sure saw arm is locked down, the miter table is locked in position and

the slide lock knob is tightened. Only lift the saw by the carrying handles built-in to the base of the saw or by the

carrying handle located on top of the motor housing. Do not lift the saw using the guards or the operating handle.

UNPACKING & TRANSPORTATION

WARNING!

Do not plug in or turn on the tool until it is fully assembled according to the instructions. Failure

to follow the safety instructions may result in serious personal injury.

Components

Accessories & Tools

Miter Saw (1)

6mm Hex Wrench /

Cross Screwdriver (1)

Miter Lock Handle (1)

Wood Clamp (1)

Right Adjustable

Fence (1)

*Left Adjustable

Fence (1)

Blade (1)

Dust Bag (1)

* Pre-Assembled on the unit.

Содержание MM1215





































Результаты поиска

Содержание MM1215

Отзывы:

Похожие инструкции для MM1215

Бренды по названию

Популярные бренды

Wen MM1215, Инструкция по эксплуатации

Результаты поиска

Содержание MM1215

Отзывы:

Похожие инструкции для MM1215

Бренды по названию

Популярные бренды