background image

17

TROUBLESHOOTING GUIDE

WARNING!

 Stop using the dethatcher / scarifier immediately if any of the following problems occur or risk 

serious personal injury. If you have any questions, please contact customer service at 

1-800-232-1195

 (M-F 8-5 

CST), or email 

[email protected]

.

Problem

Possible Cause

Solution

Motor Does Not Start.

1. Not connected to a power source.

1. Connect to a power source.

2. Power cord or plug is defective.

2. Contact customer service at 

1-800-232-1195.

3. Other electrical defect to the machine. 3. Contact customer service at 

1-800-232-1195.

4. Safety lock button is not pressed.

4. Press the safety lock button and the switch 

lever at the same time for start up.

Product Does Not Reach 

Full Power.

1. Extension cord is not suitable for 

operation with this machine.

1. Use the proper extension cord. Use chart on 

page 6.

2. Power source has low voltage.

2. Connect to a different power source.

3. Air vents are blocked

3. Clean the air vents.

Unsatisfying Result.

1. Cutting device is worn down.

1. Replace the tine cylinder.

2. Scarified material exceeds the ma-

chine's capacity.

2. Only scarify materials according to the capac-

ity of this machine.

3. Scarifying depth is incorrect. 

Adjust the depth for your specific operation.

Содержание DT1516

























Отзывы: