Wen 6369, Руководство пользователя

Страница: 8 / 12

REPLACE THE SANDING PAD
Insert the hex wrench into the hexagonal screw (Fig. E - 1)
located in the center of the hook and loop sanding pad. Hold
the pad firmly while turning the wrench to unscrew the center
hex screw. Replace the pad with an identical part suited for this
particular model of drywall sander. Attach firmly in place using
the hexagonal screw.
MAINTENANCE
VARIABLE SPEED CONTROL
Use the speed wheel (Fig. D - 1) to adjust anywhere
from 600 to 1500 RPM. This drywall sander is
equipped with constant speed control to keep the
pad running at a consistent rate despite changes in
applied load.
TURNING ON THE DRYWALL SANDER
After setting the variable speed to your desired RPM,
power the machine by pressing forward on the power
switch (Fig. D - 2).
88
OPERATION
Fig. D
1
2
1
Fig. E
CLEANING AND MAINTAINING YOUR DRYWALL SANDER
Your drywall sander requires no additional lubrication or maintenance. Always store your sander in a dry place
away from children. If the supply cord is damaged, it must be replaced by the manufacturer or a similarly qualified
technician. Do not use a damaged tool.
If excessive sparking occurs, have the carbon brushes checked by a qualified electrician. Only a qualified techni-
cian should change the carbon brushes.
Clean the unit immediately after using it. Regularly clean the unit with a damp cloth and a little soft soap. Do not
use cleaners or solvents as they will attack the plastic of the unit. Make sure water does not get into the unit.