Wen 61793, Руководство пользователя, Страница: 12 / 18

5. Connect the nailer to the air supply. Load the magazine and test fire a nail into a scrap piece of wood to confirm
the nailer is working properly again.
WARNING:
If nails continue to jam, stop using the nailer. Contact our customer service at 800-232-1195
(M-F 8-5 CST).
1. Disconnect the nailer from the air supply
2. Pull the feeder shoe all the way to the back of the magazine until it
latches. Slide fasteners to the back and remove all remaining fasten-
ers from the magazine.
3. Use a pair of needle nose pliers or a flat head screwdriver to
remove the bent fastener from the back opening of the nosepiece
(Fig. 10 - 1). If the fastener cannot be removed directly, refer to the
following step to remove the magazine.
CLEARING JAMMED FASTENERS (Fig. 10 & 11)
WARNING:
Disconnect air line from the tool and remove all fasteners before removing jammed nails to
avoid personal injury. Keep the tool pointed away from yourself and others.
1
2
Fig. 11
OPERATION
12
Fig. 10
1
4. Remove the four screws (Fig. 11 - 1 & Fig. 11 - 2) using the hex key and slide the magazine off the nosepiece.
Remove the bent fastener. Reattach the magazine and replace the four screws.