Wen 5662, Инструкция по эксплуатации

Страница: 11 / 16

MAINTENANCE
1. KNOW YOUR LIMITATIONS. Do not overload your snow thrower’s capacity by attempting to clear snow at too
fast of a rate.
2. Use of the snow thrower for operations outside of its intended usages could result in a dangerous situation.
3. Do not attempt to repair the snow thrower unless you have the proper tools and knowledge for disassembly and
repair. Our recommendation for repairs would usually be to take the unit to a qualified service technician.
4. Check the bolts at frequent intervals for proper tightness to ensure that the equipment is in safe working condi-
tion.
5. After each snow removal session, run the snow thrower for a few minutes to prevent the collector/impeller from
freezing. Shut off the motor, wait for all revolving parts to stop completely, and wipe the residual ice and snow off
of the unit. Rotate the chute crank several times to remove any excess snow.
LIFETIME LUBRICATION: Lubrication is not necessary and may damage the unit. The snow thrower is lubricated for
lifetime use at the factory before shipment.
STORAGE
1. Rid the snow thrower of snow and ice buildup before storage or transportation. Be sure to secure the unit during
transportation.
2. Disconnect the extension cord from the snow thrower between uses. Inspect the extension cord closely for signs
of wear or damage. Replace it as necessary. Do not store a damaged extension cord, as the next user may not ex-
amine it as closely.
3. Inspect the snow thrower carefully for worn, loose or damaged parts. Check connections and screws. Tighten as
necessary.
4. Store the unit along with the disconnected extension cord in a locked, dry place away from the reach of children
to prevent unauthorized use or damage. Cover loosely with a tarp for added protection.
WARNING! Make sure to turn off the switch and disconnect the extension cord before performing any
maintenance tasks on your snow thrower.
11