MAINTENANCE
AIR CLEANER MAINTENANCE
Routine maintenance of the air cleaner helps maintain prop-
er airflow to the carburetor. Occasionally check that the air
cleaner is free of excessive dirt. Refer to Recommended
Maintenance Schedule.
1. Unscrew the cover bolt (Fig. 15 - 1), then remove the air
cleaner cover.
2. Remove the air cleaner element from the casing (the
sponge-like filter inside).
3. Check and clean the spongy filter. Replace with a new
one if the element has been damaged. Good filters can be
washed in soapy water, dried and reused.
4. Wipe off excessive oil from the air cleaner case. Small
amounts of oil in the element is normal and necessary for
the engine to work properly.
5. Reinstall the air cleaner element and cover.
CAUTION!
Running the engine with dirty, damaged
or missing air cleaner element will cause the engine to
wear out prematurely.
FUEL FILTER CUP CLEANING
The fuel filter cup is a small well underneath the fuel valve. It helps to trap dirt and water that may be in the fuel tank
before it can enter the engine. To clean the fuel filter cup:
1. Turn the fuel valve to the “OFF” position (Fig. 16).
2. Unscrew the fuel filter cup from the fuel valve using a wrench. Turn the valve towards you and unscrew it.
3. Clean the cup of all sediments using a rag or brush.
4. Reinstall the fuel filter cup.
To maximize the lifespan of this generator, make sure to run it at least once a month. If you do not run it often,
it will greatly shorten the lifespan and performace of the generator.
OFF
ON
Fig. 15
Fig. 16
1
26
Содержание 56475
Страница 37: ...WIRING DIAGRAM 37...
Страница 39: ...NOTES 39...
Страница 40: ...V 2021 03 09 THANKS FOR REMEMBERING...