![background image](http://html.mh-extra.com/html/wen/40415/40415_instruction-manual_956604009.webp)
ELECTRICAL INFORMATION
AMPERAGE
REQUIRED GAUGE FOR EXTENSION CORDS
25 ft.
50 ft.
100 ft.
150 ft.
2.5A
18 gauge
16 gauge
14 gauge
12 gauge
GROUNDING INSTRUCTIONS (FOR CHARGER)
IN THE EVENT OF A MALFUNCTION OR BREAKDOWN,
grounding provides the path of least resistance for an
electric current and reduces the risk of electric shock. This tool is equipped with an electric cord that has an
equipment grounding conductor and a grounding plug. The plug MUST be plugged into a matching outlet that is
properly installed and grounded in accordance with ALL local codes and ordinances.
DO NOT MODIFY THE PLUG PROVIDED.
If it will not fit the outlet, have the proper outlet installed by a licensed
electrician.
IMPROPER CONNECTION
of the equipment grounding conductor can result in electric shock. The conductor with
the green insulation (with or without yellow stripes) is the equipment grounding conductor. If repair or replacement
of the electric cord or plug is necessary, DO NOT connect the equipment grounding conductor to a live terminal.
CHECK
with a licensed electrician or service personnel if you do not completely understand the grounding instructions
or whether the tool is properly grounded.
GUIDELINES FOR EXTENSION CORDS
Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy
enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting
in loss of power and overheating. The table below shows the correct size to be used according to cord length and
nameplate ampere rating. When in doubt, use a heavier cord. The smaller the gauge number, the heavier the cord.
Make sure your extension cord is properly wired and in good condition. Always replace a damaged extension cord
or have it repaired by a qualified person before using it.
Protect your extension cords from sharp objects, excessive heat and damp/wet areas.
CAUTION!
In all cases, make certain the outlet in question is properly grounded. If you are not sure, have a
licensed electrician check the outlet.
WARNING!
This charger is for indoor use only. Do not expose either the tool, the battery or the charger to
rain or use in damp locations.
Use a separate electrical circuit for your tools. This circuit must not be less than a #12 wire and should be protected
with a 15 A time-delayed fuse. Before connecting the motor to the power line, make sure the switch is in the OFF
position and the electric current is rated the same as the current stamped on the motor nameplate. Running at a
lower voltage will damage the motor.
WARNING!
This tool must be grounded while in use to protect the operator from electric shock.
9
Содержание 40415
Страница 15: ...EXPLODED VIEW PARTS LIST 15 ...