![background image](http://html.mh-extra.com/html/wen/40415/40415_instruction-manual_956604011.webp)
PREPARING THE HEDGE TRIMMER
Before starting the hedge trimmer, check that the trigger switches and safety switches are moving freely, returning
automatically and quickly upon release. Also check that the cooling air vents are not obstructed and that both the
front and rear handles are clean and dry.
After making sure that the hedge trimmer isn’t demonstrating any symptoms of damage and that the battery has
been fully charged, you are ready to begin trimming hedges.
STARTING THE HEDGE TRIMMER
The hedge trimmer is equipped with a two-handed safety switch. In order to power the machine on, you must press
both the front handle’s safety switch and the rear handle’s trigger switch simultaneously.
Always hold the hedge trimmer with both hands during operation.
TRIMMING HEDGES WITH THE HEDGE TRIMMER
Don’t let its name deceive you. A hedge trimmer is primarily used to cut hedges, but can also be used on shrubs and
bushes as well. For the best results, angle the blade of the hedge trimmer 15° from the targeted hedge.
A string or tie can be used as a guideline in order to create a level hedge. Just position the string at the preferred
height and cut everything that protrudes past it.
The unit can be used in either direction. Use a sweeping motion back and forth for even cuts. Avoid cutting limbs
and branches larger than 2/3 of an inch. Do not force the hedge trimmer through heavy shrubbery. If the blades
become jammed, immediately release the trigger and remove the battery pack. NOTE: never uninstall the battery
pack while the blade is still in motion or while the trigger is pressed.
Always be careful of flying debris during operation. Wear gloves when trimming thorny or prickly foliage.
CLEANING THE HEDGE TRIMMER
Keep all safety devices, air vents, and motor housing free of debris and dirt. Wipe down the equipment with a cloth
and/or compressed air. It is highly suggested that you clean the device after every use. Do not use cleaning agents,
as these can attack the plastic and weaken the structural integrity of the hedge trimmer. Remove deposits from the
guard hood with a brush.
CARBON BRUSHES
The carbon brushes need to be replaced by a qualified service technician. Do not attempt to replace them yourself.
LUBRICATION
For a long lifespan, make sure that the cutters are cleaned and lubricated at regular intervals in order to ensure the
best possible performance. Routinely apply a thin film of lubricating oil.
OPERATION
MAINTENANCE
WARNING!
Always be sure to remove the battery before adjusting, cleaning, or checking a function on the
tool.
11
Содержание 40415
Страница 15: ...EXPLODED VIEW PARTS LIST 15 ...