Wen 3200-PSI Скачать руководство пользователя страница 22

Страница: 22 / 22

STORING THE PRESSURE WASHER FOR EXTENDED PERIODS:

1. Drain the fuel tank (see “Draining the Fuel Tank” in the “Maintenance” section).

2. Change oil.

3. Do not obstruct any ventilation openings.

4. Keep the pressure washer in a cool dry area.

TRANSPORTING THE PRESSURE WASHER:

1. Tighten fuel cap. Drain the fuel tank if possible.

2. Always keep the pressure washer upright. Do not lay it down sideways.

STORAGE & TRANSPORT

TROUBLESHOOTING

WARNING:

Stop using the tool immediately if any of the following problems occur. Repairs and

replacements should only be performed by an authorized technician. For any questions, please contact

our customer service at (800) 232-1195, M-F 8-5 CST or email us at [email protected].

PROBLEM

CAUSE

SOLUTION

Engine will not start

Engine switch is set to “OFF”

Set engine switch to “ON”

Fuel valve is turned to “OFF:

Turn fuel valve to “ON” position

Choke is open

Close the choke

Engine is out of fuel

Add gasoline

Engine is filled with contaminated or old gasoline

Change the gasoline in the gas tank

Spark plug is dirty

Clean spark plug

Spark plug is broken

Replace spark plug

Generator is not on level surface

Move generator to a level surface to prevent low

oil shutdown from triggering

Oil is low

Add or replace oil

Water pressure is weak

Water supply is restricted

Inspect garden hose for leaks. Make sure you are

using a large enough hose (min. 3/4” diameter)

Water is not turned on to full power

Open water source all the way

Not using high pressure nozzle

Change nozzle

Detergent and spray do not mix

Detergent hose is not submerged or has disconnected

Make sure hose is connected and submerged in

the detergent

Black soap nozzle needed

Use soap nozzle

Pump fails to produce pressure or

pressure is inconsistent

Water supply is restricted

Inspect garden hose for leaks. Make sure you are

using a large enough hose (min. 3/4” diameter)

Water not turned on full power

Open water source all the way

Nozzle is clogged

Clean nozzle

Spray gun leaks

Check spray gun connection or replace spray gun

Air in line

Squeeze trigger handle to remove air

Inlet hose screen is clogged

Clean inlet

Water supply is over 100° F

Use cool water supply

Pump is faulty

Contact customer service at 1-800-232-1195 for

assistance.

Содержание 3200-PSI























Результаты поиска

Содержание 3200-PSI

Отзывы:

Похожие инструкции для 3200-PSI

Бренды по названию

Популярные бренды

Wen 3200-PSI, Руководство пользователя

Результаты поиска

Содержание 3200-PSI

Отзывы:

Похожие инструкции для 3200-PSI

Бренды по названию

Популярные бренды