PREPARATION & ASSEMBLY
INSTALLING THE BATTERIES (FIG. 3 & 4)
1. Remove the battery pack by pressing down on the two
cover tabs (Fig. 3 - 1) and sliding the battery pack cover out
of the tool.
2. Remove the battery holder from the cover by pressing
down the two holder tabs (Fig. 4 - 1) and sliding the battery
holder out of the cover.
3. Insert the four AA batteries (not included) into the battery
holder, according to the polarity markings indicated on the
battery holder surface (Fig. 4 - 2).
4. Align the arrows (Fig. 4 - 3) on the battery holder with the
arrows on the battery pack cover. Press down the holder
tabs and slide the battery pack into the cover until a click
is heard.
NOTE:
The parts will ONLY fit when the arrows are aligned.
5. Align the arrows on the battery cover with the arrows on
the rotary tool (Fig. 3 - 2). Insert the battery pack into the
tool until a click is heard.
1
2
1
2
3
WARNING: Follow the safety instructions when handling batteries.
• Do not mix batteries of different types or different brands. Do not mix old and new batteries.
• Do not short circuit batteries.
• Do not keep batteries near fire, sources of heat, or use in direct sunlight.
• Remove batteries from tool when not being used to an extended period of time.
• Never handle leaked batteries. Do not dismantle batteries.
• Recycle used tool and batteries at your local recycling facility.
• Remove the battery if the tool is not being used for an extended period of time.
11
Fig. 3
Fig. 4
Содержание 23006
Страница 14: ...EXPLODED VIEW PARTS LIST 14 ...