4
SPECIFIC SAFETY RULES FOR THE LASER DISTANCE MEASURE
WARNING:
Do not let comfort or familiarity with the product replace strict adherence to product safety
rules. Failure to follow the safety instructions may result in serious personal injury.
WARNING:
Do not direct the laser beam at persons or animals. Do not stare into the direct or reflected
laser beam, not even from a distance. Looking into the laser beam or directing the laser beam into someone’s
eyes can cause eye damage, blindness, and cause accidents.
WARNING:
LASER RADIATION. Class 2 laser. DO NOT STARE INTO THE BEAM.
1.
Device purpose.
This Laser Distance Measure is designed to measure distances, lengths, heights, clearances,
areas and volumes. The measuring tool can be used both indoors and outdoors. Using the device for any other
purpose for which it is not designed may result in serious injuries, dangerous radiation exposure, device damage,
and voiding of the warranty.
2.
Never shine the laser in your eyes or the eyes of other people or animals.
This can cause permanent damage
to eyes. Do not look directly into the laser beam with unprotected eyes. Never look into the path of the beam.
3.
If laser radiation strikes your eye, you must deliberately close your eyes and immediately turn your head
away from the beam.
4.
Never point the laser beam towards reflecting surfaces.
Never point the laser towards people or animals. Even
a laser beam with a low output can cause damage to the eyes.
5.
Do not allow children to use the laser measuring tool.
They could unintentionally blind other persons or them-
selves.
6.
Device inspection
. Before operation, check the device and batteries for any damage or missing parts. Do not use
the device if any part is missing or damaged. Make sure all adjustments are correct and all connections are tight.
7.
Do not try to open or disassemble your measuring device.
Never open the laser module as unexpected exposure
to the beam can occur. The laser cannot be replaced with a different type of laser.
8.
Cleaning.
Never use solvents to clean plastic parts. Solvents could dissolve or otherwise damage the material.
Use only a soft damp cloth to clean plastic parts.
9.
Do not make any modifications to the laser equipment.
Have the measuring device repaired only by qualified
specialists.
Safety is a combination of common sense, staying alert and knowing how your item works.
SAVE THESE SAFETY INSTRUCTIONS.
WARNING:
Read and understand all warnings, cautions and operating instructions before using this
device. Failure to follow all instructions listed below may result in personal injury and device damage.
Содержание 10165
Страница 15: ...NOTES 15 ...
Страница 16: ...THANKS FOR REMEMBERING ...