10
1. Make sure you are in distance measuring mode depicted by the arrow symbol . If you’re in a different mode,
press the mode button until you see the arrow symbol on the screen.
2. Make sure to set your measuring device’s reference point and units (see p. 8).
3. Hold down the measurement button for two seconds. You are now in continuous measuring mode. As the
distance between the reference point and target point changes, the measurement will update on the screen and
you will hear a tone. Press the measurement button to exit continuous measuring mode.
NOTE:
The device will not save the measurements while you are in continuous measuring mode. The laser stays
on the duration of the continuous measurement. DO NOT shine the laser towards people or animals.
MEASURING VOLUME
The volume measuring function is made for measuring the volume of a rectangular prismatic space. This function
is depicted by the cube symbol .
OPERATION
WARNING:
Do not direct the laser beam at persons or animals. Do not stare into the direct or reflected
laser beam, not even from a distance. Looking into the laser beam or directing the laser beam into someone’s
eyes can cause eye damage, blindness, and cause accidents.
1. Make sure you are in volume measuring mode depicted by the
cube symbol . If you’re in a different mode, press the mode button
until you see the cube symbol on the screen.
2. Make sure to set your measuring device’s reference point and units
(see p. 8).
3. If the laser beam is not ON, press the measurement button to
activate the laser. You will see the laser icon in the top left corner
when the laser is activated. Aim the laser to measure the length. Press
the measurement button again to take the measurement. The
value will be seen on your display.
4. Repeat step 3 two more times to measure the width, and height.
The volume will automatically calculate after the third measurement is
taken. The value of the last measurement will be seen on the top row
of your screen and the volume will be on the bottom. Your screen will
look like Fig. 6.
NOTE:
A line will appear on the edge of the volume symbol to
indicate which measurement you are recording.
CONTINUOUS MEASURING
The continuous measuring setting allows you to move the device and
receive updated measurements every few seconds.
Fig. 6
NOTE:
The laser will automatically
shut off after 30 seconds of inactiv-
ity to prolong battery life and limit
accidents.
NOTE:
The bottom number on your
display is the current measurement
being recorded. If you take multiple
measurements, the previous mea-
surement moves to the top row.
Laser ON/OFF
Volume Mode
Battery
Level
Units
Previous
Measurement
Volume
Содержание 10165
Страница 15: ...NOTES 15 ...
Страница 16: ...THANKS FOR REMEMBERING ...