page
13
Owner’s Manual
HPC-3000 / WPC-4000 / HPC-5000 / WPC-7000 / WPC-9000 / WPC-15000
Moving the Unit
Unlock the casters and push the unit using the side handles to a flat, level surface
and set the cater brakes to the locked position.
Plugging in the Unit
Check the prongs and surface of the power cord plug for dust/dirt. If dust and/or
dirt are present, wipe off with a clean, dry cloth.
Check the power cord, plug, and prongs for damage or excess play.
If any damage or excess play is found, contact a qualified repair technician or a
qualified electrician to perform replacement of repair of the power cord, plug,
or prongs.
NOTE:
Make sure the AC outlet is free of dirt, dust, oil, water, or any other for-
eign material.
The unit is equipped with an approved NEMA plug configuration (HPC-3000 =
5-15P; WPC-4000 = 5-20P; HPC-5000 = 6-15P; WPC-7000 = 6-20P; WPC-9000 =
6-30P ; WPC-15000 = 6-50P). The appropriate outlet must be used for each plug
type.
If the power cord or plug are damaged, repair
should only be performed by qualified electrician.
DO NOT connect / disconnect the power cord or
attempt to operate buttons with wet hands. This
could result in electrical shock.
WARNING
WARNING
