Wellis Amazon W-Flow, Руководство пользователя

Страница: 95 / 144

95
Q: WHY IS MY HOT TUB WATER CLOUDY/OILY?
A: If your hot tub becomes cloudy or oily due to bather load
perform an additional Boost and wait for 24 hours to see if
conditions return to normal. If the problem persists consult a
hot tub/pool dealer to have your water balanced properly.
Q: DOES THE SODIUM BROMIDE EVAPORATE?
A: No. Sodium bromide is only lost through splash out, eaks
or when draining your hot tub.
Q: WHAT SHOULD I USE TO CLEAN MY HOT TUB?
A: Always use a non-sudsing cleaner found at your hot tub store.
Q: WHEN MY IN.CLEAR BROMINE GENERATOR IS
OFF DOES THE SODIUM BROMIDE CONTINUE SANI-
TIZING MY HOT TUB?
A: No, the in.clear system does not sanitize if inactive. If there
is a residual bank of bromine, bromine continues to sanitize
the hot tub water. The in.clear may be off at certain times and
the hot tub will still be fine and clean.
The sodium bromide is converted to bromine as it passes
through the electrodes of the in.clear system and the pump
associated with the in.clear is running.
FREQUENTLY ASKED QUESTIONS
ORGANIC MATTER
Substances left behind by hot
tub users such as oil, sweat and
dead skin cells that serve as
"food" for bacteria.
CALCIUM HARD-
NESS (CH)
Calcium Hardness describes
the concentration of calcium in
your hot tub water.
TOTAL HARDNESS
(TH)
Total Hardness describes the
concentration of calcium and
magnesium in your hot tub
water.
BATHER LOAD
This term is used to describe the
number of bathers using a hot
tub, combined with the length
and frequency of its usage.
The higher the bath usage, the
greater quantity of chemicals
needs to be added to maintain
the same hot tub water quality.
TDS
Total Dissolved Solids (TDS) is
an expression for the combined
content of all inorganic and
organic substances contained
in a liquid which are present
in a molecular, ionized or
micro-granular (colloidal sol)
suspended form.
pH
pH (potential hydrogen) is
a measure of the acidity or
basicity of a solution.
TOTAL ALKALINITY
(TA)
Total Alkalinity or TA is a mea-
sure of the ability of a solution
(such as water) to neutralize
acids to the equivalence point
of carbonate or bicarbonate.
PPM
"Parts-per million" notation is
used to denote relative propor-
tions or a comparative ratio in a
given measured quantity.
The expression "1 PPM" means
a given property exists at a
relative proportion of one part
per million parts examined, as
would occur if a water-borne
pollutant was present at a
concentration of one-millionth
of a gram per gram of sample
solution.
GLOSSARY
OPTIONAL ACCESSORIES - IN.CLEAR