11
NOTE
• After changing the batteries, the meter automatically prompts you to check the time and
date when it is turned on either by inserting a test strip or pressing OK. If it is correct, press
OK to confirm setup and exit, or if the time and date are not correct, refer to the chapter
“Setting the Clock“.
• The date and stored results will not be erased when the batteries are being changed.
• Discard used batteries according to your local guidelines.
• The meter uses 2 x 3-volt lithium batteries, coin cell CR2032. This type of battery can be
found in many stores. Always keep a spare packaged battery on hand.
• Be sure the batteries go in with the “+” side up.
• Remove the batteries if you are not going to use the meter for a long time.
Setting the Clock
Material you will need:
Your Wellion LEONARDO GLU/CHOL (plus) Meter
Step 1: With the meter turned off, press and hold the OK
button until the screen displays “FunC“.
Содержание LEONARDO GLU/CHOL plus
Страница 1: ...OWNER S GUIDE ...
Страница 23: ...23 ...