welldana 52-210094, Инструкция по установке и эксплуатации

Страница: 23 / 31

EN
24
•
Check the sauna stones ( 1.1.). Too tightly
piled stones, the settling of stones with time
or wrong stone type can hinder the air flow
through the heater, which results in reduced
heating efficiency.
•
Check that the sauna room ventilation has
been arranged correctly ( 2.2.).
The sauna room heats quickly, but the
temperature of the stones remain insufficient.
Water thrown on the stones runs through.
•
Turn the temperature to a lower setting.
•
Check that the heater output is not too high
( 2.3.).
•
Check that the sauna room ventilation has
been arranged correctly ( 2.2.).
Panel or other material near the heater blackens
quickly.
•
Check that the requirements for safety
distances are fulfilled ( 3.2.).
•
Check the sauna stones ( 1.1.). Too tightly
piled stones, the settling of stones with time
or wrong stone type can hinder the air flow
through the heater, which may result in
overheating of surrounding materials.
•
Check that no heating elements can be seen
behind the stones. If heating elements can be
seen, rearrange the stones so that the heating
elements are covered completely ( 1.1.).
•
Also see section 2.1.1.
The heater emits smell.
•
See section 1.2.
•
The hot heater may emphasize odours mixed
in the air that are not, however, caused by the
sauna or the heater. Examples: paint, glue, oil,
seasoning.