22
every equipment when more than two equipments work as IP output mode
within the same broadcasting network.
2.5.4.3 System
You can modify or query the information about the equipment.
●
Host IP Address
: set the IP address for connecting the equipment to the
NMS.
●
Host Subnet Mask/ Host Gateway
: the two parameters should be the
same as your server
’s subnet mask and gateway.
●
Host MAC Address
: set the MAC address of this equipment.
●
Hardware/ Software Version
: the current hardware or software version
installed in the equipment.
Notice
:
1. After you modify the four parameters and press MENU button to apply
it, the equipment will restart automatically.
2. The ‘Host IP Address’ and the server’s IP address, should be in the
s
ame network section; ‘Host Gateway’ and the server’s gateway, ‘Host
Subnet Mask’ and the server’s Subnet Mask should be the same. For
example:
Parameter
H.264 encoder
Server
IP Address
192.168.1.x (x: 3 ~254)
192.168.1.2
Gateway
192.168.1.1
192.168.1.1
Subnet Mask
255.255.255.0
255.255.255.0
3. When more than two pieces of encoders are connected to the same
server, it’s necessary to set different ‘Host IP Address’ and ‘Host MAC
Address’ for each one.
