19
Fig 2-2
It’s convenient to manage several equipments at the same time via the NMS.
The NMS will read and display the name and IP address of all the equipments
connected to the server
automatically. Double click the equipment’s name to
enter the corresponding operation interface.
2.5.4 Operation interface
The operation interface is like Fig 2-3
, there’re four pages used to configure the
equipment, including: Encoder, Ethernet, System and Upgrade. You’ll see the
‘Encoder’ page as soon as entering this interface.
2.5.4.1 Encoder
You can set the basic parameters about encoding program here.
●
Video Source
: Select the corresponding option according to the actual input
source, including: CVBS (A/V), HDMI, SDI and YPbPr.
●
Video PID
: The range PID value is: 1024 ~ 8175, you can input any value
within this range according to your arrangement. However, be sure to set
different PID for Video, Audio, PCR and PMT.
●
Audio Source
: Select the corresponding option according to the actual
input source, including: CVBS (A/V), HDMI, SDI and YPbPr.
The name and IP address of all the
equipments connected to the server.
Display the correlative information
about the equipment you’re operating.
Display the status of
equipments,
including
connection and signal
locking status and so on.
These options are not
valid temporary.
Modify the user name
and password here.
