The content of pulps can be adjusted
The content of pulps in the juice can be adjusted within the range shown in the pulp content
scale (2) on the juice cup (3), as shown in Figure (a):
5= High pulp content
1= Low pulp content
Juicing
After installing the product (while adjusting the desired pulp content), press the halved citrus
fruit on the conical juicer head (5), as shown in Figure (b).
When the fruit is pressed down, the juicer starts immediately. When the fruit is removed from
the conical juicer head, the motor stops automatically. The motor can be stopped and started
by lifting and pressing the fruit on the conical juicer head, or the rotating direction of the
conical juicer head can be changed to increase the amount of juice.
Remove the juice cup from the power base before pouring.
Cleaning
Be sure to pull the power plug before cleaning.
Disassemble the product as described above. Clean the power base (1) only with a wet cloth.
All other components can be washed in a dishwasher.
The information is subject to change without prior notice.
When the service life of this product is over, do not dispose it together with household
garbage. Send it to a suitable collection point provided by the state.
Waste electrical and electronic equipment are a special waste category, collection,
storage, transport, treatment and recycling are important because they can avoid
environmental pollution and are harmful to health. Submitting waste electrical and
electronic equipment to special collection centers makes the waste to be recycled
properly and protecting the environment. Do not forget! Each electric appliance that
arrives at the landfill, the field, pollutes the environment!
Importer & distributor:
SC VITACOM ELECTRONICS SRL
CIF: RO 214527
Tel. 0264-438401*
