Notes:
1.
Highest using temperature should better be under 50 degree.
2.
The first time using, connect the water first, then the electricity second.
3.
The water scale must be cleaned regularly, ensure it won’t be blocked directly to proper
water pipes, not to non-standard faucet or pipes.
4.
Descaling and cleaning nozzle are recommended regularly, ensure nozzle not blocked.
5.
Warning: Don’t use the water heater if the water inside it was frozen and turn off the power.
Don’t install the water heater in places of frozen temperature exist.
6.
The water heater must be earthed and grounding properly, don’t exceed the prescribed
pressure.
7.
If the power supply cord is damaged, to avoid accidents, it must be replaced by qualified
electrician or service center.
8.
Please read installation instruction to avoid permanent damage to your water heater faucet.
Do not switch on until faucet has been flushed and connected correctly.
9.
Must be connected to main water or pressure hose to avoid damage to heating coil.
10.
Before installation, please confirm that the power supply is switch off, heat master is in off
position, correct leakage protector is being used.
11.
Heat Master must be connected according to the wiring diagram instructions, wiring must
be at a distance is greater than 3 mm and connected to a fused power supply system.
12.
In order to avoid damage or electrocution heat master must not be connected to any external
appliance with switch gear such as timer to avoid direct connection to circuit breaker. The
arrows on the machine represent the direction of the water flow.
Specifications
Product
Rated
Voltage
Rated
Frequency
Rated
Pressure
Working
water
Pressure
IP Rating
Rated
Power
Power
Cord
Instant
Water
Heating
Faucet
220-240V 50-60HZ
0Mpa
0.04 MPa-
0.6 MPa
IPX4
3.3KW
3X1.5mm2
(RVV
）
Circuit Diagram
