◆
Place the food tray on the top of feeding tube and fix.
◆
Locate the unit on a flat place.
◆
The air passage at the bottom and the side of the motor housing and you should not block the air
flowing.
Mincing meat
◆
Cut all foods into pieces (Sinew less, boneless and fat less meat is
recommended, approximate size :20 mm x 20 mm x 60 mm) so that the
meat can be put easily into the food tray.
◆
Plug in and press
the “ON/O/ R” switch to
“ON”
position.
◆
Feed foods into the food tray. Use only the food pusher (fig.7).
◆
After use, switch off the unit and unplug it from the power supply.
Reverse function
In cast of jamming during the grinding, the
“
R
”
of
“
ON/O/R
”
switch can help
you to solve the problem.
Switch off the appliance and wait for few seconds to 1 minute till the appliance stop completely.
◆
Press the
“
ON/O/R
”
switch to
“
R
”
position
◆
Feeding screw will be rotating in the opposite and the inside of feeding tube will get empty.
◆
If it doesn't work, switch off the appliance, disassemble and clean the feeding tube.
Making kibbe
Stuffing recipe
Mutton 100g
Olive oil 1 tablespoons
Onion (cut finely) 1 tablespoons
Spices to your taste
Salt to your taste
Flour 1 tablespoons
◆
Mince mutton once or twice.
◆
Fry the onion until getting brown and add minced mutton, spices, salt and flour.
