Welkin WKES001, Руководство пользователя, Страница: 6 / 24

6
Seat
When setting seat height, it’s important to ensure that the resulting ride position is not only
comfortable, but also safe. You should be able to remain stable and properly handle the
bicycle when at and comfortably and safely operate the handlebars and all controls. A good
reference height for the seat is at hip height. Do NOT have the seat raised enough so you can
see the maximum height marker on the seat post.
• Ensure that when the seat is clamped, you cannot rock it back and forth or rotate it.
1. Insert the seat post/seat assembly into the bicycle frame and adjust it to a comfortable
position-do NOT have the seat raised enough so you can see the maximum height marker on
the seat post.
2. Rotate the clamp lever from the unlock position to the lock position.It the seat post is not
clamped firmly,increase pressure by unlocking the clamp,then rotating the adjustment knob
right(clockwise) a¼ turn, then re-test and adjust as necessary.
The seat angle can also be adjusted, again for best comfort. To adjust angle, using a 13mm
spanner, loosen (rotate left) the seat clamp nuts (CC) on either side of the seat until the front
of the seat can be moved up/down. Set the angle as required, then tighten the 5 nuts securely.
Note that small changes in seat position can have a substantial effect on comfort. It is
recommended to make seat adjustments in small increments and test the position, then re-
adjust as necessary.
Front light
1.Use the #"5" spanner to loosen the screw on the front fork, then screw through the
headlight rack hole to ck the screw.