Welkin WKES001, Руководство пользователя

Страница: 16 / 24

16
bolts holding the caliper and realign it visually while looking at it straight on from the rear of
the bike.)
Pad Replacement
* Use manufacturer supplied replacement pads only .
The life expectancy of the brakes will vary depending on the amount of use etc.
You will need to change the brake pads before the metal part of the brake pad starts to make
contact with the
disc. Failure to do so will damage the disc and may void any warranty claim in relation to the
disc.
1. Remove the 2 screws holding the caliper.
2. Please insert a 5mm Allen key into the black pad holder that is holding the worn pads. This
will free the pads
so you can remove and replace them by hand.
3. Remove the worn pads.
4. Replace the new pads into the black pad holder.
5. Lock the new pads in to the black pad holder and tighten with the 5mm Allen key.
*Please note that the black brake pad holder with magnet. This enables the distances to be
kept between the pad and the inside. Please view the diagrams which will assist you with this
process.