Welkin WKES001, Руководство пользователя, Страница: 14 / 24

14
• When new, parts of the bicycle may "break-in" over the course of the first approximate
100km of riding, possibly including the stretching of cables, spoke tension changes etc. It is
recommended to have the bicycle inspected and serviced at an authorized service centre or
by a qualified technician.
• The bicycle components are subject to wear and stress. If a component is weakened
through stress, age etc, it may fail without warning. It is important to regularly inspect the
bicycle for any signs of component fatigue - look for cracks, fraying, discoloration etc, as this
may indicate that a part is near the end of its useful life and should be replaced.
• Clean the bicycle with a soft, damp cloth - do NOT use high pressure water cleaners or
hoses, pressurized air, solvents, abrasives etc. For the console, battery and motor, do NOT use
any liquids.
• When transporting in a vehicle, it is recommended to have the battery out of the bicycle
during transport.
• Store the bicycle where it will be protected from rain, sun etc to help prevent corrosion,
fading etc.
For safety, longest possible service life and reliability, maintain the bicycle properly. Use the
components before each ride. The proper condition and function of these Systems is critical
to your maintenance schedule below for guidance. It is very important that you check certain
systems and safety.
Maintenance Schedule
Component / Condition Check Before
Every Ride
Check
Periodically
Clean /
Lubricate
Adjust / Tighten /
Replace as Required
Tyre Pressure * * *
Tyre Wear / Damage * *
Brake Adjustment * *
Handlebar Tightness * * *
Controls and Display *
Seat Post Tightness * *
Fasteners / Mounting
Hardware
*
Brake Pads / Shoes * *
Brake Cable Wear * *
Chain * * *
Reflectors *
Battery / Charger * *
Steering Head Bearings * * *
Derailleur * * *
Wheel Spoke Tension * *
Wheel Trueness * *
Wheel Bearings * * *
Bottom Bracket (Crank)
Bearings
* * *