Weldex WDP-4602MXV, Инструкция пользователя

Страница: 31 / 50

Configuration
-
NETWORK
31
This document contains confidential and proprietary information of Weldex Corporation.
WEB Viewer
•
PORT
Use this page to configure network ports.
It might take up to 20 seconds for the changes to take effect. Reconnection is automatic.
Item Description
HTTP
Configure HTTP port. This port is used for the web browser.
Default value: ’80’. This value should be either ’80’ or greater than
‘1024’.
HTTPS
Configure HTTPS port. This port is used for the web browser.
Default value: 443. This value should be either ‘443’ or greater than
‘1024’.
RTSP
RTSP port image transmission.
Default value:
554~558
554 : H.264 Streaming.
555 : MJPEG Streaming.
556~558 : Reserved.
Specify the starting port number (in the above case:554 ), and the
next consecutive port numbers will be selected automatically.
H.264 rtsp URL: rtsp://
ip_address:port /wdx/media/stream.h264
MJPEG rtsp URL: rtsp:// ip_address:port /wdx/media/stream.mjpeg
RTSP Authentication
Enable/Disable RTSP Authentication.
If enabled, username and password is required when connecting
through RTSP protocol.
Auto port forwarding
Enable/Disable Auto port forwarding.
If enabled, the connected router can automatically setup port
forwarding (the router should support this function).