7.3 Menu Configuration
Day & Night 10X Zoom Camera
15
SETUP SETUP MENU
CAM TITLE
WHITE BALANCE
BACKLIGHT
MOTION DETECTION
FOCUS
EXPOSURE
SPECIAL
RESET
EXIT
l
OFF
l
ON
l
ATW(OUTDOOR)
l
AWC
→
SET
l
MANUAL
l
OFF
l
LOW
l
MIDDLE
l
HIGH
l
OFF
l
ON
l
MODE
l
ZOOM TRK
l
ZOOM SPEED
l
D-ZOOM
l
DISP ZOOM MAG
l
ZOOM POS INIT
l
LENS INIT
l
END
l
BRIGHTNESS
l
IRIS
l
SHUTTER
l
AGC
l
DNR
l
SENS-UP
l
END
l
USER PRESET
l
PRIVACY
l
DAY/NIGHT
l
SYNC
l
COMM ADJ
l
IMAGE ADJ
l
END
7.0 Camera Operation
7.1 Key Function
Use the nine key function on rear of the camera
u
TELE ZOOM KEY
When pressing TELE ZOOM KEY user preset 1 value displays on the screen.
After 10 second, user preset 2 value displays on the screen.
This function repeats each time when pressing the Tele zoom key.
Note that user preset do not work unless the value is set up.
- TELE ZOOM setting
: Set user preset value 1 when pressing tele zoom key.
(USER PRESET 1 Setting) Setting value can be determine by user however, basic default value and optical l0x
shoud be preset before packing.
- WIDE ZOOM setting
: Set user preset value 2 when pressing tele zoom key.
(USER PRESET 2 Setting) Setting value can be determine by user however, basic default value and optical lx
shoud be preset before packing.
- DURATION Fixed
: While tele zoom key is operating.
It will be operated in about 10 seconds after user preset 1 moves to user preset 2.
v
SHUTTER KEY
SHUTTER speed can be changed each time when pressing the button.
Displays operates in order of percedence of ESC,1/60,1/100, 1/120, 1/250,1/500,1/700,1/1000,1/1600,1/2500,1/5000,
1/7000, 1/10000. When ESC operates RED LED is OFF, when shutter operates LED is on.
w
BLC KEY
BLC KEY operates BLC OFF- BLD HIGH in order of precedence.
When BLC operates RED LED is ON, when BLC is not operating LED turns off.
Day & Night 10X Zoom Camera
13
N
B
T
S
A
F
Z
W
NEAR
BLC
TELE
SHUTTER
FOCUS
ADJUST
FAR
TELE ZOOM
WIDE
ZOOM
x
ADJUSTMENT KEY
When pressing this button user preset 3and 4 displays and repeats automatically.
Note that unless preset 2and 4 value is presetted, the function does not operate.
Used user preset 3 for special purpose of night mode. Used preset 4 for break up mode.
When it is User preset 3 statue, RED LED is ON and when it is user preset 4 statue, LED is OFF.
- NIGHT setting
: 1) At FOCUS SETUP/ MODE AUTO, fix the ZOOM POSITION SET UP of tele to maximim 1x.
(USER PRESET 3 Setting) 2) Setting EXPOSURE at mode.
3) Setting ETC at mode DAY/NIGHT >> BW.
- NIGHT mode cancel setting
: At FOCUS SETUP/ MODE AUTO, fix the ZOOM POSITION SET UP of WIDE to maximum 1x.
Remaining value can be fixed according to the basic default value.
Note that the function does not operate unless user preset 3 and 4 is fixed.
7.2
Controlling the temporatly Protocol Yellow LED & Green LED ON/OFF.
There are two different port. At RS-485,
if it receives specific data LED turns ON/OFF.
Note that,Communication speed only operates in 38400bps.
Day & Night 10X Zoom Camera
14
SHUTTER >> A.FLK AGC >> OFF
DNR >> OFF
SENS-UP >> B/W
LED Operation
Yellow LED OFF
Yellow LED ON
Green LED OFF
Green LED ON
Protocol
C5 9E 00 00 00 63
C5 9E 01 00 00 64
C5 9F 00 00 00 64
C5 9F 01 00 00 65
