32
Installation steps
(1)
Find a suitable position for the extractor hood on the wall.
Drill three Ø 8 mm holes in the wall to attach the wall bracket.
Insert the enclosed dowels into the drill holes and fix the
bracket to the wall using the screws (ST4*30mm); s. fig.
below. Ensure that all screws are tightened and that the
bracket is anchored in the wall properly.
1
Drill holes (Ø 8 mm)
2
Dowels
3
Wall bracket
4
Screws (ST4*30 mm)
(2)
Drill two additional Ø 8 mm holes for the dowels and screws
by which the extractor hood can be fixed after hanging up (s.
fig. below).
