76
6.1 How to start a programme
(1)
Fill the lower rack first.
(2)
Pour the dishwasher detergent and the water softener
(=dishwasher salt) in the relevant containers.
(3)
During operation the appliance must be supplied with water
(full water pressure).
(4)
Close the door properly while pressing gently. When the
door closes properly you will hear a light KLICK.
(5)
Press the -PROGRAM- button to select a programme.
(6)
Press the ON/OFF button when the programme has ended.
Open the door.
6.2 How to change a running
programme
(1)
Open the door and press the current programme selection
for at least 3 seconds.
(2)
Set the new programme.
(3)
Close the door.
NOTICE!
You can only change a programme when it has run a
short period of time. Otherwise the detergent has
dissolved and the dishwater has been drained. In such
a case you must refill the detergent container.
When you open the door while the appliance is operating, the
appliance will stop operating. The display indicates the code
-E1-. When you close the door again, the appliance will start
operating after 10 seconds.
The six control lights indicate the
status of the appliance.
(a)
All lights are off = stand-by mode.
(b)
One light is on = the relevant programme is running.
(c)
One light flashes = pause - mode.
6.3 How to add forgotten dishes
You can put dishes later in the appliance unless the detergent
container has opened.
