Welch Allyn Diatek 600, Техническое руководство

Страница: 31 / 32

Technical Manual
Model 600 29
SCREW, THD-ROLL #4X1/4 P-PL-S-Z 83021-0000 4
SCREW, PLASTITE, 4-20 X 7/8 FLAT
HEAD 82 DEG PL-S-Z 83035-000 2
SCREW, MACH 4-40 X 1 1/16 P-PL-S-Z 83036-0000 2
SCREW, PLASTITE 4-20 X 3/4 - FLAT
HEAD 82 DEG PL-S-Z 83037-000 4
MODEL 600 PREVENTATIVE MAINTENANCE
The following suggested preventative maintenance is recommended to maximize uninterrupted service
with the Model 600 Thermometer.
Units which are in service on a regular basis should have the following preventative maintenance
performed every 18 months:
1. Visually inspect the thermometer and probe for physical damage which might cause future product
failure.
2. Clean unit if necessary and replace batteries according to the procedures found on page 22 of this
manual.
3. Perform the Power Up Display Test, Startup Display Test and Calibration Key Procedure found on
page 21 and 22 of the manual.
Units which are stored for extended period and not used should have the following preventative
maintenance performed every 36 months:
1. Replace batteries according to the procedures found on page 22 of this manual.
2. Perform the Power Up Display Test, Startup Display Test, and Calibration Plug Procedure found on
page 22 of this manual.