Welch Allyn Connex Integrated Wall System, Дополнение к инструкции по применению

Страница: 5 / 68

Addendum to the directions for use,
software versions 1.0X–1.7X
This addendum supplements the following documents:
•
Welch Allyn Connex
®
Vital Signs Monitor 6000 Series
™
directions for use (part number 103730)
•
Welch Allyn Connex
®
Integrated Wall System directions for use (part number 104066)
Before using the product, you must familiarize yourself with the sections of the directions for use
and this addendum that pertain to your use of the product.
Advanced settings
Specify patient ID settings
Patient identification appears on the Home tab in the Patient frame, and it is listed in various tabs,
such as the Patients tab and the Review tab.
1. Access the Advanced Settings.
a. Touch the
Settings
tab.
b. Touch the
Advanced
tab.
c. Enter the
Advanced settings code
.
d. Touch
OK
.
The General tab appears.
2. Touch the Data Management tab.
3. Touch the
Patient IDs
tab.
4. Specify settings.
Setting Action/Description
Name format Select a format for all displayed patient names:
Full name or Abbreviation .
Primary label Select the primary identification label for all
displayed patients.
Secondary label Select a secondary identification label for patients.
A secondary label displays only on the Home tab,
after the primary label.
Require patient ID to save readings Make entering a patient ID a prerequisite for saving
measurements. If they fail to enter an identifier, the
monitor prompts them when they try to save.
1