Welch Allyn 4802D, Инструкция по применению

Страница: 11 / 36

Assembly and setup
The scale is fully assembled at the factory and tested. In some instances, the scales are
shipped assembled. However, due to size and shipping restrictions, most scales are
partially disassembled. If assembly is required, it can be done with common hand tools.
When special tools are required, they are supplied with the scale. Ensure that all bolts
and fasteners are securely tightened.
Use the following instructions to assemble and setup your scale for use.
Assembly instructions
The scale is fully assembled at the factory and tested. The scale is shipped with the
weighing cradle removed.
1. Carefully remove the acrylic weighing cradle from the shipping carton. If you ordered
it, the oversized cradle ships in a separate carton.
2. Remove the scale from the shipping carton and place it on a stable surface. Make
sure the front panel faces you.
3. Remove the two screws on the battery cover on the top of the scale, and remove
the cover.
4. Insert the six D-size batteries that were included with your scale. Make sure to
follow the polarity directions indicated on the battery holder.
5. Replace the battery cover, and re-install the two screws.
6. Position the cradle over the scale so the four metal mounting posts line up with the
holes in the top of the scale.
Note the length gauge and position the cradle so the length gauge begins on the left.
7. Remove the protective cover from the cradle.
8. Apply gentle downward pressure to seat all four posts so the cradle rests firmly on
the scale.
9. If you purchased the optional 4802D Pediatric Scale Cart, follow the instructions
included with the cart.
7