7
Microwave instruction manual – Model:
microMD UK
/
m
i
c
r
o
MD Euro
Countertop installation
Remove all packing material and accessories. Examine the oven for any damage such as
dents or broken door. Do not install if the oven is damaged.
Case work: Remove any protective film found on the microwave oven case work surface.
Installation
1
. Select a level surface that provides
enough open space for the intake and/or
outlet vents (figure1).
2
.
Stacking and installation of the
microwave oven. The height of
stacking should be a maximum of
two layers. Specific stacking
installation is as follows:
a)
Unscrew and remove the mounting plate,
and then tighten the screws.
b)
Remove the four screws as shown in the
diagram below.
c)
Mount the mounting plate to the lower
position and fix the screws that are just
loosened.
Figure 1
A 10cm spacing should be kept between
the appliance and right and back walls,
and a 30cm spacing kept on the top. Never
dismantle the appliance’s feet, nor block the
air intake and exhaust opening. The left side
must be open.
Additional notes
a)
Blocking the intake and/or outlet
openings can damage the oven.
b)
Place the oven as far away from radios
and TV as possible. Operation of the
microwave oven may cause interference
to your radio or TV reception.
c)
Plug your oven into a standard
household outlet. Be sure the voltage
and the frequency is the same as the
voltage and the frequency on the rating
label.
d) Warning:
Any plugs, sockets or other
appliances that could be affected by heat
or moisture, should be kept away from
oven vents.
