10
Microwave instruction manual – Model:
microMD UK
/
microMD Euro
8.
End-of-cook-cycle mode
(a)
When the manual cook mode or a pre-set
program cook mode finishes, the oven will go
into the end-of-cook-cycle mode.
(b)
During this mode, “DONE” displays.
(c)
If either user option “OP:11” or “OP:12”
(see User Options, Appendix A p13) is selected,
the oven will continue to sound until the user
acknowledges this by either opening and
closing the door or pressing
the “
“ keypad. If the User Option OP:10 is
selected, after the 3 second beep, the oven
will display “DONE”. After the beep, “READY”
will display and the oven will enter idle mode
without any operation for a period of time.
9.
Pre-set program cook mode
(a) This mode allows cooking of food items through
a one keypad touch operation. While in ready
mode, pressing number buttons will cause the
oven to run the pre-set program associated
with that number button.
(b)
During this mode, the screen displays the
remaining cooking time. If it is multi-stage
cooking, the total remaining cooking time
displays no particular stage cooking time.
(c) When the cooking program finishes, the oven
will enter end of cook-cycle mode. If you press
“
“ button under this mode, the oven will enter
pause mode.
10. Ad-hoc cooking
(a)
While the oven is cooking, if user option “OP:51”
(see User Options, Appendix A p13) is selected,
press number buttons, the pre-set cooking
program will start automatically.
(b) The screen displays the remaining cooking time.
(c) When the cooking program finishes, the oven
will enter end-of-cook-cycle mode.
11
.
Time defrost function
(a) In ready mode, press “DEFROST “ button,
the screen will display “
00.00
” .
(b)
Press the number buttons to input defrosting
time. The maximum time is 99 minutes and
99 seconds.
(c)
Press “
“ to start defrosting. The default power
is power level 20%.
(d) The remaining cooking time will be displayed.
When the cooking program finishes, the oven
will enter end-of-cook-cycle mode. If you press
“
“ button under this mode, the oven will enter
pause mode.
12
.
Programming mode
This mode allows the user to assign cook times and
power levels to the once touch button
(a)
Open the door and press “1” keypad for
5 seconds, the buzzer will sound once and
enter into programming mode.
(b)
“PROGRAM” displays.
(c)
Setting program: Press the number button to
set the program. 2 seconds later, the screen will
display the time associated with that number
button.
(d)
Input the time: Press the number buttons to
input time.
(e)
Press the “POWER LEVEL” button, “%POWER”
displays. Press the number buttons to select the
power level you want, and the corresponding
power will light. If you want to choose full
power level, press “1” and “0” successively. The
screen will then display “%POWER”. If no power
is chosen, 100% power is the default.
Note: Set the time first, then choose the power.
(f)
After setting the time and power, press “
“,
the cooking program will be saved. When the
program is saved, “PROGRAM” displays.
(g)
If the cooking time you have input exceeds the
max. time in user option 7 (see User Option 7,
Appendix A p13), when you press “
“ to save
the program, the buzzer will sound three times
briefly to tell you there is an error. The screen
will then display “PROGRAM”. The time set
before will not change.
