11
Microwave instruction manual – Model:
microMD UK
/
m
i
c
r
o
MD Euro
(h)
Close the door, the oven will turn back to ready
mode. If you press “
“ button during the
setting process, the oven turns to door-open
mode. The program will not save and will be
lost. If there is a saved program stored, press
the related number button and the saved
program will start. If there is no saved program,
a buzzer will alarm when pressing the number
button and it will not work.
For example, set the program as memory
cooking. Power level 70% and cooking time is
1 minute 25 seconds.
Step 1:
Open the door, press number button
“1” for 5 seconds,”PROGRAM” displays.
Step 2:
Press number button “3”, the screen will
display “P:03”. After two seconds, the screen will
display the related time “:30”.
Step 3:
Press number buttons “1”, “2” and “5” to
input the cooking time.
Step 4:
Press the button “POWER LEVEL”
,
and then press button number “7 “,
”1:25 70” displays. Setting finished.
Step 5:
Press “
” to save. When using the
program next time, just press “3”, the related
program will start.
Note:
1.
If the electricity is cut off, the saved program
will not be lost.
2.
If the program needs to reset, just repeat the
above steps.
3.
If “
” is pressed at the last step, it will turn back
to door open mode.
13. Double/triple quantity cooking
(a)
If the “X2” or “X3” button is pressed in ready
mode, followed by the starting of a pre-set
program, or if the “X2” or “X3” button is pressed
in 5 seconds of starting a pre-set program, the
oven will start cooking with the quantity pre-set
cooking time.
(b)
Press “X2”, “DOUBLE” displays. Press “X3”,
“TRIPLE” displays. After pressing the number
buttons, the screen will display the total
quantity pre-set time. For example, number
button “5” and its pre-set time is 1 minute.
Then press “X2”, then time will change to
1:00*2=2 (2 minutes)
(c) When the cooking program finishes, the oven
will enter end-of-cook-cycle mode.
14
.
Stage cooking programming
This allows the user to cook food items in manual
cook mode and programming mode.
(a)
A maximum of 3 stages can be set under
cooking mode or programming mode. After
setting the power and time for the first stage,
press “ Time Entry “ to set the second stage.
Repeat the same steps for the third stage.
(b)
When setting the second and third stages, press
“ Time Entry”, “STAGE-2”,”STAGE-3” displays.
(c)
Press “
“ button to start cooking. For example:
In programming mode, press number button
“3” to set two stages of cooking. The first stage
is PL7 and time is 1 minute 25 seconds. The
second stage is PL5 and 5 minutes and 40
seconds. The steps are as follows.
Step 1:
Open the door, press number button
“1” for 5 seconds ,”PROGRAM” displays.
Step 2:
Press number button “3”, the screen will
display “P:03”,After two seconds, the screen will
display the related time “:30”.
Step 3:
Press “1”, ”2”, ”5” to input the cooking
time. “1:25” displays.
Step 4:
Press the button “ POWER LEVEL “, and
then press number 7, “1:25 70” displays.
The first stage is finished.
Step 5: Press “ Time Entry”, “STAGE-2” displays.
Step 6:
Press “5”, “4”, ”0” button, “5:40” displays.
Step 7:
Press the button “ POWER LEVEL “, and
then press number 5, “5:40 50 “ displays.
The second stage is finished.
Step 8:
Press “
“ button to start cooking.
