28
Part Number: 000014110 Rev 01 1/19
If vacuuming is needed to ensure removal
of all broken glass, keep the following tips
in mind:
• Keep a window or door to the outdoors
open.
• Vacuum the area where the bulb was
broken using the vacuum hose, if
available; and remove the vacuum bag
(or empty and wipe the canister) and
seal the bag/vacuum debris, and any
materials used to clean the vacuum, in a
plastic bag.
• Promptly place all bulb debris and
cleanup materials, including vacuum
cleaner bags, outdoors in a trash
container or protected area until
materials can be disposed of properly.
• Check with your local or state
government about disposal
requirements in your area. Some states
and communities require fluorescent
bulbs (broken or unbroken) be taken to a
local recycling center.
• Wash your hands with soap and water
after disposing of the jars or plastic
bags containing bulb debris and cleanup
materials.
• Continue to air out the room where the
bulb was broken and leave the H&AC
system shut off, as practical, for several
hours.
FUTURE CLEANING OF CARPETING OR
RUGS
1. Air out the room during and after
vacuuming.
2. The next several times you vacuum the
rug or carpet:
A. Shut off the H&AC system.
B. Close the doors to other rooms.
C. Open a window or door to the
outside before vacuuming.
D. Change the vacuum bag after each
use in this area.
NOTE: After vacuuming is completed, keep
the H&AC system shut off and the window
or door to the outside open, as practical,
for several hours.
Содержание Manitowoc LuminIce II
Страница 2: ......
Страница 22: ...22 Part Number 000014110 Rev 01 1 19 Installation Section 2 THIS PAGE INTENTIONALLY LEFT BLANK ...
Страница 29: ......