Welbilt FRYMASTER FilterQuick FQE30, Инструкция по установке, эксплуатации и обслуживанию

Страница: 24 / 44

4-5
Filter Pump Reset Switch
4.6 Draining and Refilling Vats, and Disposing of Oil
When cooking oil requires changing, drain the oil into an appropriate container for transport to the
disposal container. (For safe, convenient draining and disposal of used oil, Frymaster recommends
the use of the Frymaster Shortening Disposal Unit (SDU) for JIB systems. The SDU is available
through your local distributor.)
Do not drain boil-out solution into an SDU
. NOTE: If using
an SDU built before January 2004 the filter pan cover must be removed to allow the unit to be
positioned beneath the drain. To remove the cover, lift up on the front edge slightly and slip the oil
guard up and pull it straight out of the cabinet. Refer to the documentation furnished with your
disposal unit for specific operating instructions. If a shortening disposal unit is not available, allow
the oil to cool to 100°F (38°C), then drain the oil into a
METAL
container with a capacity of FOUR
(4) gallons (15 liters) or larger to prevent oil from spilling. If using a bulk oil system, follow the
disposal and refilling instructions for bulk oil in the FilterQuick Controller Manual 8197206.
DANGER
When draining oil into an appropriate METAL container, make sure the container will
hold at least FOUR gallons (15 liters) or more, otherwise hot liquid could overflow
and cause injury.
DANGER
Allow oil to cool to 100°F (38°C) before draining into an appropriate
METAL
container for disposal.
DANGER
When draining oil into a disposal unit, do not fill above the maximum fill line located
on the container.
DANGER
Draining and filtering of cooking oil must be accomplished with care to avoid the
possibility of a serious burn caused by careless handling. The oil to be filtered is at
or near 350°F (177°C). Wear all appropriate safety equipment when draining and
filtering oil.