Welbilt Delfield CV10E, Оригинальное руководство пользователя, Страница: 29 / 42

Part Number: 9294045 07/19 29
Section 4 Troubleshooting
T40 Installation and Assembly
4. Attach the right side panel
to the mounting floor in the
same manner as the other
two panels. Lock the side
locking cams on the inside
bottom and side of the panel.
Insert T-handle wrench and
twist until a positive stop is
achieved.
NOTE: Ensure all cam locks are in the open position before
placing any panels.
NOTE: Do not break alignment block when placing panels
in place.
5. Attach the front panel
in the same manner as
the others. Front panel
will wrap around the
sides. Lock all side and
bottom cams when the
panel is in position. Insert
T-handle wrench and twist
clockwise until a positive
stop is achieved.
- Attache the left side deflector shield to the front panel
with the provided screws. The shield should cover the
coner.
6. Place the top panel on to the top of the cabinet with
the refrigeration holes facing the first panel. Thread the
refrigeration pipes through the supplied holes and ensure
there is no binding.
NOTE: Ensure all cam locks are in the open position before
placing any panels.
Lock all side cams when the panel is in position. Insert
T-hanfle wrench and twist clockwise until a positive stop
is achieved.
7. Place the control panel on the outside of the top and
front of the unit. Attach with supplied screws and screw
holes.
1. Hole for probes
2. Electrical hole
3. Refrigerant unit holes.