Weka 816.1002.00.00, Инструкция по сборке, эксплуатации и обслуживанию

Страница: 4 / 24

Techn. Änderungen vorbehalten! Alle Maßangaben sind ca. Maße.

Copyright HRB 3662
4
- en -
Dear customer
Thank you very much for choosing a weka product.
 Read these instructions through completely before assembling your product in order to avoid errors in
assembly or damage.
 IMPORTANT
Please use the enclosed packing list to check immediately that your weka product has been
delivered complete and intact.
 Please do not dispose of the packing list before the guarantee period has expired. This list enables you
to check that all the individual parts are present. It should be retained along with the proof of purchase.
Any complaints which may arise can probably be easily rectified with this list. The item numbers on the
packing list do not correspond to the item numbers in the following assembly instructions.
 We recommend that 2 people carry out the assembly.
 In order to prevent accidents, we recommend that children are kept out of the direct vicinity during
assembly.
 We reserve the right to make further technological developments. This means that there many be minor
deviations in the illustrations.
 Please do not simply throw away the packaging material. Paper, card and corrugated board as well as
plastic packaging materials should be placed in the correct collection containers.
Recommendations
 Please drill pilot holes for all screw connections to avoid damaging the wood. The following symbol in
the instructions will indicate when this is necessary:
 The screw connections should be checked and retightened at regular intervals.
INFORMATION
 Wood is a natural product. Varied colouring, knurls and crack formation are normal and have no
influence on the statics.
 Dry cracks may form as a result of extreme weather conditions, especially after long hot periods. These
dry cracks are in no way a defect in quality but are a part of the natural appearance of the wood.
Depending on the weather these cracks may close up again to a minimum. Moreover, these dry cracks,
which form longitudinally in the wood, have no effect on the strength and resilience of the material.

Wood protection
 Before and during assembly, protect untreated wood from direct sunlight or moisture.
 The wood must not be exposed to bright sun or moisture before and during assembly. Pressure-treated
products are already protected against moisture, wood-eating insects and fungus. Greying of the surface
is not prevented. Blue stain protection is not provided.

We advise you to treat all wood components with blue stain prior to assembly.

A regular coating in accordance with the manufacturer’s instructions of the wood protection agent is
necessary to protect the wood.
 We recommend that you consult an expert in wood treatment agents!
 Failure to observe these instructions will shorten the life of your product and you may lose your
warranty/guarantee rights.