Electronic Control Card TS004E
Function description
3
Function description
The product is used to control and monitor the rotary indexing table types (TC) and the rotary indexing
ring types (TR) with position cams. It allows for autonomous operation of the rotary indexing table/
rotary indexing ring and for control via a master controller (PLC).
The rotary indexing table/rotary indexing ring is equipped with a position cam on the driving cam and
with an inductive sensor. The inductive sensor provides a signal when the output flange is in locked
position. The product then stops the motor and provides a release signal to the processing station.
The motor is stopped when a delay time has elapsed which is set via the switches at the counter
display. This way, the drive moves to a start position for the next cycle.
The drive must come to a standstill in the locked phase. This is monitored by the product; an error is
indicated by the status indicator (
position overrun
) and/or a corresponding signal is provided to the
PLC. If this error occurs, all processing stations must be immediately reset and the motor supply must
be switched off since the rotary indexing table/rotary indexing ring is not in a locked position.
The product allows for motor temperature monitoring via the temperature switch.
The product remains downward compatible so that it can replace older versions in the case of repairs.
8 / 29
User manual_082018_1.0_en
