WEISS
Installation- and operating manual Handling device HP140T R09-2011
27/52
Transportation
4.1 Transportation damage
4
4
Transportation
During transport and storage, devices must be protected from ex-
cessive stress (mechanical load, temperature, humidity, rough atmospheric condi-
tions). The horizontal track of the HP140T must be protected from exposure to
magnetic or metallic objects. Do not bring any external magnets into contact with
the horizontal track; this would result in the failure of the magnetic measurement
system, i.e. the control of the axle would no longer be possible.
•
Transport work may only be conducted by specialised personnel, who take the safety
instructions into account.
•
Note that projecting sharp edges can cause injuries.
•
The transport path must be cordoned off and safeguarded in such a manner that
unauthorised personnel cannot enter the danger zone.
•
The parts must be safeguarded against tipping or falling.
4.1
Transportation damage
The delivery should be inspected for damage immediately after receipt. The contents of
the delivery should be checked for damage if damage to the packaging is detected,
which could indicate damage to the contents. Details of the scope of delivery are provi-
ded in Chapter 3.3.1.
Damage detected should be immediately reported to and confirmed by the transportation
company.
4.2
Intermediate storage
The storage conditions detailed in the table should be observed if intermediate storage
over a longer period of time is planned.
Climatic
zone
Packaging
Storage location
Storage duration
All
Packed in contai-
ners
With moisture
absorbers and
humidity indicator
sealed in film
Protect against
insect damage and
mould formation
through chemical
treatment
Roofed over
Protected against rain
Not exposed to vibrations
Max. 3 years with
regular inspection of
packaging
Open
Roofed over and sealed at a
constant temperature and air
humidity (5 °C < T < 60 °C,
50% relative humidity)
No sudden temperature fluc-
tuation and controlled ventila-
tion with filter (free of dirt and
dust)
No aggressive vapours and no
vibrations
Protected against insect
damage
2 years and longer
with regular inspec-
tion. Check for cle-
anliness and
machine damage
during inspection.
Check that anticor-
rosion protection is
unspoiled.
