WEISS GAMBIT EQ1-MKII, Руководство по эксплуатации

Страница: 24 / 26

OPERATING INSTRUCTIONS FOR GAMBIT EQUALIZER EQ1-MK2 TECHNICAL DATA
Daniel Weiss Engineering Ltd., Florastr. 42, CH-8610 Uster Page 24 of 26
)
+41 1 940 20 06
2
+41 1 940 22 14
8
http://www.weiss.c
*
weiss@weiss.ch
Overall Gain CH2 Control Change 1011 cccc 01000111 ($47) (cccc) Channel No.
0vvv vvvv (vvvvvvv) New Value:
0 - 127
CH1 / 2 SELECT Control Change 1011 cccc 01001000 ($48) (cccc) Channel No.
0vvv vvvv (vvvvvvv) New Value:
0, 1
EQ Bypass Control Change 1011 cccc 01001001 ($49) (cccc) Channel No.
0vvv vvvv (vvvvvvv) New Value:
0, 1
Set Ganged Mode Control Change 1011 cccc 01001010 ($4A) (cccc) Channel No.
0vvv vvvv (vvvvvvv) New Value:
0, 1
Toggle A <> B Control Change 1011 cccc 01001011 ($4B) (cccc) Channel No.
0vvv vvvv (vvvvvvv) New Value:
0, 1
MSC Mode Control Change 1011 cccc 01001100 ($4C) (cccc) Channel No.
0vvv vvvv (vvvvvvv) New Value:
Bit 0: on/off, 1=on
Bit 1: Input: 1=MSC, 0=L/R
Bit 2: EQ: 1=MSC, 0=L/R
Bit 3: Output: 1=MSC, 0=L/R
Bit 4: 1 = CH swap, 0= norm
System Reset 1111 1111 - Recall Snapshot 0 to WS A
Dump Remote Control
All System-Exklusive commands consist of a header, a message type, possible data and the EOS (end of
system exclusive). Below is the format of the header:
Byte Value Description Section
1 F0 Sysex Header
2 00 Manufacturer's ID
3 30 Manufacturer's ID
4 5A Manufacturer's ID
5 06 Model ID: 6 = Gambit EQ
6 0000nnnn Device ID: -> Midi channel number
Following is a list of the supported MIDI system exclusive commands (without header):
Snapshot format for dump. A complete dump consists of 128 snapshots:
Byte Value Description Section
1-6 ... ... Header
7 00000001 message = Snapshot dump Message Type
8 0nnnnnnn Package number ( 0..7F) Data
9 0nnnnnnn scale set number
10 - 265 0nnnnnnn 256 Bytes of Snapshot data
266 0ccccccc Checksum without byte one (F0 Sysex Command) Checksum
267 F7 EOS EOS