WEISS ROBOTICS GRIPKIT CR EASY, Инструкция по эксплуатации

Страница: 24 / 40

2
EN
GL
ISH
TM
defined operating limits.
Any other use is considered to be improper, e.g. if the gripping module is used for
pressing, curring, lifting, punching or as a clamping or guidance aid for other tools. The
manufacturer is not liable for any damage resulting from this improper use.
2.2 Environmental and operating conditions
GRIPKIT CR EASY and the included gripping module may only be used in the context of
its defined application parameters. Make sure, that the module and the gripper fingers
are at sufficient size for the application. The environment has to be clean and the ambi
-
ent temperature must not exceed the specifications in this document. In addition, the
environment must be free from splash water and vapors as well as from abrasion or
processing dust, except the used gripping module is especially designed for contami
-
nated environments.
2.3 Controlled production
GRIPKIT CR EASY represents the state of the art and the recognized safety rules at the
time of delivery. However, it can present risks if, for example:
• GRIPKIT CR EASY is not used in accordance with its intended purpose
• GRIPKIT CR EASY is modified, or not installed or maintained properly
• The EC Machinery Directive, the VDE directives, the safety and accident-preven -
tion regulations valid at the usage site, or the safety and installation notes are
not observed
2.3.1 Protective equipment
Provide protective equipment per EC Machinery Directive where required.
2.3.2 Constructional changes, attachments or modifications
Additional drill holes, threads or attachments that are not offered as accessories by
Weiss Robotics may be attached only with written permission of Weiss Robotics.
2.3.3 Special standards
The following harmonized standards are adhered to:
• RF interference, noise and emission according to IEC/EN 61000-6-3
• Fast transients (bursts) on supply and I/O lines according to IEC/EN 61000-4-4
• RF power input on supply and I/O lines according to IEC/EN 61000-4-6