manualshive.com logo in svg

Weishaupt WTC-GB 90-A, Инструкция по установке и эксплуатации

Поделиться
Скачать
Weishaupt WTC-GB 90-A Скачать руководство пользователя страница 6

1 User instructions

Translation of original

operating instructions

These installation and operating instructions form part of the unit and must be kept

on site.

1.1 User guide

1.1.1 Symbols

DANGER

Immediate danger with high risk. 

Non observance can lead to serious injury or death.

WARNING

Danger with medium risk. 

Non observance can lead to environmental damage,

serious injury or death.

CAUTION

Danger with low risk. 

Non observance can cause damage to the equipment

and injury to personnel.

Important information.

Requires direct action.

Result after an action.

Itemisation.

Range.

1.1.2 Target group

These installation and operating instructions are intended for the operator and quali-

fied personnel. They should be observed by all personnel working on the unit.
Work on the unit must only be carried out by personnel who have the relevant training

and instruction.

Installation and operating instruction

Gas condensing boiler WTC-GB 90-A

1 User instructions

83266502 • 1/2010-08 • La

6-95

Содержание WTC-GB 90-A

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды