Weinmann BiLevel ST 22, Руководство по эксплуатации

Страница: 9 / 56

Safety instructions
9
2. Safety instructions
2.1 Safety regulations
Please read these Operating Instructions through carefully. They form part of the unit
and should be available at all times. Only use the unit for the purposes described
(see "1.1 Intended use" on page 7).
For your own safety, the safety of your patients, and to comply with the requirements
of EU Directive 93/42 EEC, please observe the following:
Operating the unit
Caution!
• The power supply supplied allows the unit to be operated at
voltages between 115 V and 230 V. Check that your supply
voltage falls within this range.
• Always secure the mains socket on the power supply using the cable
securing clip to prevent unintentional removal of the plug.
• BiLevel ST 22 must be connected to an easily accessible socket, so
that in the event of a failure, the mains plug can be quickly removed.
• To avoid overheating, do not position the unit near a source of heat
or in direct sunlight. Condensation could also form in the VENTI click
humidifier, which then condenses out in the hose system.
• Do not cover the unit with bedding etc. The air inlet would then be
blocked and the unit could overheat, resulting in insufficient therapy
delivery and damage to the unit.
• Maintain a safe distance between the BiLevel ST 22 and equipment
that emits HF radiation (e.g. cell phones) (see page 50). The unit
may otherwise malfunction.
• Should the unit fail, an alternative ventilation system should be
available on standby.