WEILOR WIS 370, Инструкция по эксплуатации

Страница: 56 / 68

56
Burner Combination
This function is used if one burner is not
enough to heat the dishes properly (for example,
large dishes for fish or meat). To enable the
“FLEXI / Combination cooking zone” function,
press the corresponding button on the display
in the display .
FLEXI ZONE
If necessary, it can be used as a single burner
or as two independent burners.
In this case, there are two inductors operating
independently of each other. During operation
of the free heating zone, only that area on which
the cookware is installed is activated.
If more than one burner is needed to place
the cookware, install it starting from the top or
bottom edge of the free heating zone.
Use of two independent burners
The front and rear burners (in each case with
two inductors) can be used independently of
each other. Set the required degree of heating
for each burner separately. Use only one pan /
pan for each burner.
Recommendations
Place cookware on cooking surfaces with
more than one free heating zone so that only
one of the free heating zones is covered.
Otherwise, the hobs do not activate correctly,
which will negatively affect the cooking result.
EN
FUNCTION OF THE DEVICE