WEILOR WIS 370, Инструкция по эксплуатации

Страница: 46 / 68

46
EN
IMPORTANT INFORMATION
Product information
Important safety instructions
Before using your device
Your safety is important for us. Please read
this instruction manual and installation before
using your device.
Please, keep the instruction manual in a safe
place.
This appliance is intended for home use.
The microcomputer induction hob can meet
different kinds of cuisine demands because of
resistance wire heating, micro-computerized
control and multi-power selection, really the
optimal choice for modern families.
The induction cooker hob centers on
customers and adopts personalized design. The
hob has safe and reliable performances, making
your life comfortable and enabling to fully enjoy
the pleasure from life.
a minimum position of 3 mm between the
contacts in the off state. This is not necessary
if the device is connected to an electrical outlet
via a grounded outlet that is easily accessible.
When connecting the device to an outlet, you
should remember that the ground wire should
be connected first and switched off at the last.
On the appliance side, the ground wire must be
longer than the other wires, so that when the
cooking surface is moved it is turned off last.
The hob can be built into the kitchen furniture
and installed above the ventilation ovens.
When installing the unit, make sure that no
part of the hob is energized.
•
Read these instructions carefully before
installing or using this appliance.
•
No combustible material or products should be
placed on this appliance at any time.
•
Please make this information available to the
person responsible for installing the appliance as
it could reduce your installation costs.
•
In order to avoid a hazard, this appliance must
be installed according to these instructions for
installation.
•
This appliance is to be properly installed and
earthed only by a suitably qualified person.
•
This appliance should be connected to a circuit
which incorporates an isolating switch providing
full disconnection from the power supply.
•
Failure to install the appliance correctly could
invalidate any warranty or liability claims.
Remove the protective packaging. After
removing the packaging, check the hob for
damage. Do not connect the hob if you have
found any damage during transport. Please
contact the Service centr TM Weilor.
Before connecting the hob, make sure that
the electrical outlet is earthed and installed
in accordance with current safety regulations.
Installation and connect the hob must have a
qualified wizard.
Using the appliance without grounding or with
improperly installed grounding can result in
serious consequences (injury or electric shock).
The manufacturer is not liable for improper use
and damages caused by improper installation of
the hob.
In order to comply with the standard safety
requirements, the electrician carries out the
connection of the device, installs a disconnect
device, deactivates all contacts and provides
Thank you for choosing a technique ТМ Weilor!