Weil-McLain SGO Series Скачать руководство пользователя страница 4

4

Routine Maintenance Schedule

The schedule below is specifically designed for the homeowner. 

Please read pages 2 and 3 before proceeding.

Beginning each heating season:

Call a qualified service technician to perform  
annual service.

Daily during heating season:

Check that boiler area is free from combusti- 
ble materials, gasoline and other flammable  
vapors and liquids.

Weekly during heating season:

Check for and remove any obstructions to flow 
of combustion or ventilation air to boiler.

Check that breeching is attached between 
boiler and chimney. If  breeching is loose or 
damaged, immediately turn off switch on front 
of boiler and call qualified service technician 
to repair.

Check for oil leaks in oil piping and around 
burner. If found, immediately call qualified 
service technician to correct situation.

Check for water leaks in boiler and piping; 
also check for leaks around tankless heater 
plate. If found, immediately call qualified 
service technician to repair.

Float-type low water cutoff, when used:
Refer to control manufacturer's instructions.

Scald potential. Do not blow 

down low water cutoff unless blowdown 
piping has been installed according to Boiler 
Manual. If piping is not in place, call qualified 
service technician to install. 

L

L

L

Periodically during heating season:

 

Probe-type low water cutoff, when used:

 

Refer to control manufacturer's instructions  

 for 

testing.

End of heating season:

If tankless heater is installed, boiler will 
continue to operate. Check for the following:
-

All daily, weekly and monthly instructions 
listed on this page must be followed.

-

Burner motor may have to be oiled. Some 
motors are permanently lubricated and do 
not 

need additional oil. Check for oiling 

instructions on burner or motor. 

Boiler shutdown:

 

Do not drain boiler unless exposure to 

 

freezing temperatures will occur. 

 

Do not use antifreeze in steam systems.

 

Always keep manual fuel supply shut off if  

 

burner is shut down for an extended period of  

 time.

 

a.  Turn off switch at boiler and any external  

  switch 

to 

boiler.

 

b.  Close fuel valves. 

 

c.  Turn off water feed valve.

 

d.  Cover burner to protect from dust and 

  dampness.

Part No. 550-141-830/1202

Содержание SGO Series













Отзывы: