上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD
42
/
53
3.3.1
Select a WCS
This operation is used to select a WCS from G54 to G59 for machining.
Before selecting a WCS, press
→
1
→
F2
, and modify the value of parameter
N62023 Ignore Coordinate System Instruction
to
Yes
.
To select a WCS, do the following:
1.
To move the curser to the target coordinate column, press
←
or
→
.
The color of the column turns into light blue.
2.
To select the coordinate system, press
F1
.
The name of the selected WCS
GXX
is highlighted in
Part Offset
area, and shows in
the coordinate display areas on the
Coor
interface under
Gen.
functional area and
Coor Manager
interface under
Adv.
interface.
3.3.2
Set the Offsets
This operation is used to set the workpiece offset and the public offset. The former is
used to show the distance of the workpiece origin relative to the machine origin,
while the latter is used to adjust the workpiece origin of each axis for all WCSs.
To set the offsets, do the following:
1.
Set the workpiece offset:
1.
To enable
Modify
, press
T
, and input the manufacturer password.
2.
Press
↑
,
↓
,
←
or
→
to select the target input box, press
Enter
, and input
the modified value.
2.
Set the public offset:
1.
To enable
Modify
, press
H
, and input the manufacturer password.
2.
Press
↑
,
↓
,
←
or
→
to select the target input box, press
Enter
, and input
the modified value.
3.
Optional:
To deepen (reduce) or lift (increase) Z-axis public offset,
press
F7
or
F8
, and input the adjusted value.
The adjusted value is an accumulated value and it does not differentiate
positive value and negative value.
After setting, press
T
and
H
to disable modifying the workpiece offset and public
offset.
